UE Systems ultrasonic instruments for leak detection are used in energy conservation, predictive maintenance, and safety and quality assurance programs. The Ultraprobe Series is recognized as the standard in portable airborne ultrasound instrumentation. Supported by an array of specialized accessories and software, UE Systems also provides continuous online monitors for quality control and advanced warning of leaks.
Ultraprobe 2000
UE Systems’ Ultraprobe 2000 is an ultrasonic inspection instrument. The Ultraprobe 2000 works in simple and sophisticated leak detection applications. UE Systems designed user-friendly features into the Ultraprobe 2000 to make it easy-to-use and functional in the field. Features include:
Frequency tuning – allows the operator to select the specific frequency of a problem sound. Selecting a specific frequency has the added benefit of reducing interference from ultrasonic signals generated by nearby equipment.
Bi-modal meter switch – Logarithmic metering for instant leak detection and fault detection response and Linear mode for bearing and mechanical monitoring, which accepts a wide range of sounds that is averaged for stabilized readings
Ten turn sensitivity adjust dial – helps operators detect subtle mechanical and leak problems as well as focus in on gross signals
Trisonic scanning module – patented transducer has a phased array of three transducers delivering sensitivity previously not attainable
Specifications
Construction
Metered pistol anodized aluminum and ABS plastic
Circuitry
Solid-state heterodyne receiver with temperature compensation
Frequency
Detects ultrasonic frequencies between 20 kHz and 100 kHz
Response
Continuously variable. Frequencies are converted to 50 Hz to 3 kHz audio
Ultraprobe 2000 Kit Complete
Trisonic Scanning Module
Rubber Focusing Probe
Stethoscope Probe
Deluxe Industrial Noise Reducing Headset
Video Training Tape Program
Extension Probe Kit
Warble Tone Generator
Battery Recharge Kit
Zero Halliburton Aluminum Carrying Case
Ultraprobe 9000
Open platform software
Interchangeable modules
Frequency tuning
Spin and Click technology
120 dB Dynamic range
400 Memory locations record: dB, time, frequency, date, text, operation mode, and more
Acoustic isolating headphones
Environmentally friendly rechargeable batteries
Superior application support
Easy interface for most vibration analyzers including: SKF, ENTEK, DLI, CSI, DI
Developed by the industry leader in airborne ultrasound
Ultraprobe 9000 Kit Complete
DHC-2 Deluxe Noise Isolating Headset
WTG-1 Warble Tone Generator
RFE-9 Rubber Focusing Probe
5PC-C9 I/O Cable
BCH-9 Battery Charger
BCH-WTG Battery Charger
SCM-9 Trisonic Scanning Module
STM-9 Stethoscope (Contact) Module
SLP-EXT Stethoscope Extension Kit
Pistol-Grip Housing
Ultraprobe 550
Auditory channels (via an acoustically isolating headset)
Analog meter
Demodulated signal for vibration data collectors and FFT’s
Kits also available
Ultraprobe 100
Heterodynes signals into audible range
Sounds come through headset and also display as intensity increments on the meter
Kits also available
UCA 586
Typical applications:
Bearing monitoring
Valve leak monitoring
Flow/No Flow
Solid Flow Detection
Electrical
Cavitation Monitor
Coal Fineness Monitor
Bearing lubrication failure
Gearbox monitor
DS 386
Fast response
Real-time testing
High Volume Testing
Choice of test modes: gross or fine
Unique modular sensitivity validation
Modular “plug and play circuitry”
Low maintenance
Ease of installation
Choice of sensor arrays
Accessories
Long Range Module – advanced technology from UE Systems and National Aeronautics and Space Administration
Close Focus Module – a specialized module to help locate low level leaks
Ultrasonic Wave Form Concentrator – doubles the detection range and pinpoints ultrasonic emissions at great distances
Liquid Leak Amplifier – for low level leaks down to 1 x 10-6 std. Ml/sec.
Warble Tone Generators – for leak detection without pressure or vacuum
Magnetic Mount Probes – transducers and male connecting pins for attachment to the STM-2, STM-9, or STM-1 stethoscope modules
Fox Thermal Flow Meters for Compressed Air and Other Gases
Thermal Insertion and Inline Flow Meters Offer Precision Air and Fuel Flow Measurement
Every mass flow meter sold by Fox Thermal Instruments is based on the thermal sensing principle. This proven flow technology helps plant managers improve productivity and reduce costs.
Our advanced digital flow meters feature rugged industrial packaging
and are available in a variety of insertion and inline configurations,
making them the ideal instrument for a wide range of precision
industrial and commercial air and gas flow applications.
Leading edge designs by Fox Thermal Instruments include:
Model FT2 Thermal Gas Flow Meter & Temperature Transmitters - FM & FMc approved!
Inline and insertion flow meters with smart digital electronics and
NEMA 4X enclosures accommodate a wide range of gas, fuel and oxygen
flow rates. The Fox Power Pro sensor operates at a higher power level
than competitive models, resulting in the fastest response time and
widest turndown of any thermal flow meter.
Providing a direct reading of air or gas mass flow rate, these rugged
flow meters feature explosion-proof enclosures and are FM and CSA
approved for Class I, Division 1, Groups B, C and D hazardous areas.
Common applications include compressed air and natural gas measurement.
Model SW100 Flow & Level Switch for Liquids and Gases
These versatile flow and level switches are designed for gas, liquid
and slurry applications, and are approved for Class I, Division 1,
Groups B, C, and D hazardous areas.
Our
air and gas flow meters are designed for use in a wide variety of
applications, including inert and explosive gases as well as mixed and
corrosive gases. By utilizing rugged stainless steel or Hastelloy
wetted materials, Fox Thermal Instruments' devices provide precision
performance and outstanding durability. Inline and insertion flow
meters have demonstrated their accuracy, reliability and low
cost-of-ownership in these and many other applications:
compressed air monitoring
oxygen flow monitoring
natural gas to boilers, burners and other combustion processes
wastewater aeration
hydrogen metering
land fill gas measurement
purge monitoring
flare gas monitoring
exhaust gas measurement
chlorine metering
Nyad Moisture Analyzers
The A.C.T. (Advanced Capacitive Transducer) moisture sensor uses state-of-the-art technology to produce a fast-responding, rugged, trace moisture sensor that is also designed to lower your costs by permitting sensor replacement without having to discard old probe bodies. The A.C.T. technology has dramatic improvements in its performance as well as a high specificity to moisture compared to older, competitive versions.
Wide dynamic range: -130°C to +20°C Dew/Frostpoint
These analyzers use a replaceable electrochemical cell, and among its advanced features are its lower temperature coefficient due to diffusion barrier design, immunity to CO2, and its wide range. It provides more than a year’s life in normal applications, and it is suitable for multi-background gas samples.
These monitors were designed to accurately and reliably monitor the Carbon Monoxide content of high pressure breathing air or medical air supplies and provide an alarm when safe levels are exceeded. They feature an advanced electrochemical sensor whose digitized output is sent to a microprocessor-based analyzer that provides a digital display of Carbon Monoxide concentration.
These analyzers measure both moisture and Oxygen concentrations in gas samples. In one package you have the convenience of two independent gas analyzers with separate displays, outputs, and alarms.
Independent analyzers for each measurement
Interchangeable signal processing electronics
Wide dynamic range: -130°C to +20°C Dew/Frostpoint
Selectable units (°C, °F or ppm Moisture)
Direct Reading PPM (0 to 9999 Oxygen)
Auto ranging/Auto calibration using air or span gases (Oxygen)
Remote sensors (to 1000 ft.)
Adjustable alarm contacts
Two large 4 digit LCD displays
Non-Volatile data memory
O.E.M. packaging
Moisture / Carbon Monoxide Analyzers
These analyzers were designed to accurately and reliably measure both moisture and Carbon Monoxide concentrations in breathing air or medical air supplies as well as provide alarms when safe levels are exceeded. In one package, the 600 series offers two independent analyzers with separate displays, outputs and alarms.
Independent analyzers for each measurement
Microprocessor based electronics
Wide dynamic range, Moisture: -130°C to +20°C Dew/Frostpoint
Selectable units: (°C, °F, or ppm, Moisture)
Direct reading Carbon Monoxide concentration: 0-2000 ppm
UE Systems’ Ultraprobe 2000 is an ultrasonic inspection instrument. The Ultraprobe 2000 works in simple and sophisticated leak detection applications. UE Systems designed user-friendly features into the Ultraprobe 2000 to make it easy-to-use and functional in the field. Features include:
