






|
CompAir Air Compressors
Industrial Process Soultions is proud to represent CompAir as a Dealer for select products for our markets and trading territory. CompAir is a leading global supplier, providing high performance and low operating cost compressors and ancillaries for a broad range of applications.
Oil Injected Rotary Screw Compressor
L Series
Oil Injected Rotary Screw Compressors 10 to 15 HP (7 to 11KW)
Oil Injected Rotary Screw Compressors 20 to 30 HP
Oil Injected Rotary Screw Compressors 40 to 150 HP (30 to 110 KW)
Oil Injected Rotary Screw Compressor
LRS Series
LRS Oil Lubricated Rotary Screw Compressors with VSD 30 to 180 HP (22 to 132KW)
Oil Free Rotary Screw Compressors
DHRS Series
DHRS Oil- Less Rotary Screw Compressors with VSD 20 to 150 HP (15 to 110KW)
Oil Free Rotary Screw Compressors
D Series
D Series Oil-Free Rotary Screw Compressors 75 to 400 HP (55 to 300KW)
CompAir Oil Free Rotary Screw Compressors
DHRS Series with VSD 20 - 150 HP (15 to 110KW)
As industry changes so do its demands: In many applications, compressed air has become active and in processes where air comes into contact with the process it serves, the quality of that air becomes critical.
High technology industries demand higher quality air. To meet the exacting standards of industry CompAir has developed an outstanding range of Oil-free machines the D and DH series. Not only are they Oil-free, but Oil-less as they contain no oil at all.
The new DH Series D50HSR and D75HSR are the most efficient compressors on the market today.
Features & Benefits
- 12 Month Purchase Assurance Plan
- Totally Oil -Less / Direct Drive
- No Fear of Upset or Oil Downline
- Wide Turn Down Range (70%)
- Single Stage Compression
- Lower Maintenance/ Repair Costs
- Low Rotor Speed < 3700 RPM
- Water Injected Cooling / Sealing
- Near Isothermal Compression
- No Metal to Metal Ware
- Axial / Radial Loads Fully Balanced
- Direct Drive no Oil / Gear Box
- No Hassels With Oil Service
- Low Air Discharge Temperature
- Reduce Downstream Cooling
- Integrated Water Purification System
- Low Noise Levels
- VSD is Standard
- SST Air/ Water Serarator
- No filters or Parts/ Maintenance Free
- Discharge Air Temperature ~ 30F> Ambient
- IP55 / TEFC Direct Drive Motor
- Efficient Power Transfer/ Less Drive Losses
- Delcos 3100 Microprocessor Controls
- Operates, Monitors, Alarms, Safety, Protection
Specifications
| Model No. |
Motor HP |
Pressure |
CFM |
L" |
W" |
H" |
Noise dB(A) |
Weight A/C |
Weight W/C |
| D15HRS |
20 |
73-145 |
24-81 |
66 |
34 |
60 |
74 |
1510 |
1356 |
| D22HRS |
30 |
73-145 |
38-120 |
66 |
34 |
60 |
75 |
1631 |
1433 |
| D37HRS |
50 |
73-145 |
43-225 |
68 |
36 |
65 |
73 |
2138 |
1918 |
| D56HRS |
67 |
73-145 |
72-264 |
85 |
56 |
78 |
72 |
4080 |
3859 |
| D75HRS |
100 |
73-145 |
123-416 |
85 |
56 |
78 |
75 |
4410 |
4190 |
| D110HRS |
150 |
73-145 |
116-634 |
85 |
56 |
78 |
75 |
N/A |
4630 |
| Compare CompAir™ |
| Component |
2 Stage Oil Free Screw |
DH Series Oil- Less |
| Compression Elements |
2 |
1 |
| Gears |
7 |
0 |
| Bearings |
19 |
7 |
| Seals |
17 |
2 |
| Oil Pump |
1 |
0 |
| Oil Cooler |
1 |
0 |
| Oil Filter |
1 |
0 |
| Oil |
1 |
0 |
| Water Filter |
0 |
2 |
| Oil Pressure Regulator |
1 |
0 |
| Interstage Cooler |
1 |
0 |
| Final Cooler |
1 |
0 |
| Water Cooler |
0 |
1 |
| Rotational Speed |
10,000 to 20,000 RPM |
2960 to 3580 RPM |
| Pulsation Dampeners |
2 |
0 |
| Blow Down Silencer |
1 |
0 |
| Pressure Reliefs |
2 |
1 |
| Moisture Separator's) |
2 |
1 |
| Drain Traps |
2 |
0 |
| Pressure Transmitters |
3 |
2 |
| Temperature Sensors |
4 |
1 |
| Total Components |
68 |
18 |
CompAir Oil Free Rotary Screw Compressors
D Series 75 to 400 HP (55 to 300KW)
High technology industries demand higher quality air. To meet the exacting standards of industry CompAir has developed an outstanding range of Oil-free machines the D and DH series. Not only are they Oil-free, but Oil-less as they contain no oil at all.
The D Series compression element design sets the industry standard for energy efficiency.
Why Oil Free / Oil- Less
- No oily condensate treatment means no environmental waste to deal with
- No need for oil and oil filters which means reduced maintenance
- Less air treatment components means less pressure drop and energy savings
- Protect down stream compressed air process and components from contamination
- Reduce the impact to product spoilage and costly rework due to oily contamination
D Series Standard Features & Benefits
- All of the oil - free benefits
- Advanced rotor profiles / elements
- High 2 stage compression efficiency
- Rotors & casing coated
- Protection and compression efficiency
- Heavy duty / low friction bearings
- ** Balanced pistons on LP/HP stages
- Reduce thrust load & increase bearing life
- ** Automatic motor bearing lubricators(8000hrs.)
- IP55/ TEFC drive motor (1.1 SF)
- ** Separate gear box lube pump
- pre lube on start up and complete lube on shut down<
- ** Auto restart after power failure
- ** Star Delta motor
- "Soft - Start" reduction in starting current - energy savings & lower install costs
- ** Labyrinth seals
- vs. floating ring or lip seals means less shaft wear & longer life
- ** Gear box drive with pumped oil drain
- Quick / clean oil changes
- ** Electric relay protection
- Phase protection reversal, failure and imbalance
- SureScan Controller®
- Monitor, control, protection, extensive diagnostics, interface, RS485
- Low noise levels - 73 to 77 dB(A)
- ** Opti - Cool on air cooled machines
- Maximizes oil, motor, interstage and after cooler performance
- Removable hinged doors
- Ease of access to "service group"
** Standard features on CompAir - Not available or optional only on competitive compressors
Specifications
D Series Oil - Less Rotary Screw Compressors
2 Stage - Air - Cooled - TEFC Motors |
| |
|
CFM/PSIG |
Dimensions |
|
|
|
| Model No. |
Motor HP |
100 |
L" |
W" |
H" |
Noise dB(A) |
Weight (lbs.) |
Connection
(ins.)
|
| D-55-08A |
75/55 |
266 |
114 |
63 |
81 |
73 |
5038 |
DN80 Flg |
| D75-08A |
100/75 |
401 |
114 |
63 |
81 |
74 |
5478 |
DN80 Flg |
| D75-10A |
100/75 |
401 |
114 |
63 |
81 |
74 |
5478 |
DN80 Flg |
| D90-08A |
125/90 |
520 |
114 |
63 |
81 |
75 |
5632 |
DN80 Flg |
| D90-10A |
125/90 |
520 |
114 |
63 |
81 |
75 |
5632 |
DN80 Flg |
| D110-08A |
150/110 |
630 |
114 |
63 |
81 |
76 |
6138 |
DN80 Flg |
| D150-08A |
200/150 |
796 |
114 |
63 |
81 |
77 |
6486 |
DN80 Flg |
| D150-10A |
200/150 |
796 |
114 |
63 |
81 |
77 |
6486 |
DN80 Flg |
D Series Oil - Less Rotary Screw Compressors
2 Stage - Water-Cooled- TEFC Motors |
| |
|
CFM/PSIG |
Dimensions |
|
|
|
| Model No. |
Motor HP |
100 |
L" |
W" |
H" |
Noise dB(A) |
Weight (lbs.) |
Connection
(ins.)
|
| D55-07W |
75/55 |
334/110 |
114 |
63 |
91 |
75 |
4834 |
R3 |
| D75-10W |
100/75 |
330/152 |
114 |
63 |
91 |
75 |
5120 |
R3 |
| D75-07W |
100/75 |
467/110 |
114 |
63 |
91 |
76 |
5120 |
R3 |
| D90-10W |
125/90 |
462/152 |
114 |
63 |
91 |
76 |
5341 |
R3 |
| D90-07W |
125/90 |
591/110 |
114 |
63 |
91 |
77 |
5341 |
R3 |
| D110-10W |
150/110 |
587/152 |
114 |
63 |
91 |
77 |
5341 |
R3 |
| D110-07W |
150/110 |
700/110 |
114 |
63 |
91 |
78 |
5341 |
R3 |
| D150-10W |
200/150 |
696/152 |
114 |
63 |
91 |
78 |
6267 |
R3 |
| D150-7W |
200/150 |
816/110 |
114 |
63 |
91 |
79 |
6267 |
R3 |
| D155-10W |
200/160 |
809/152 |
114 |
63 |
91 |
79 |
6293 |
R3 |
| D160-08W |
200/160 |
876/116 |
126 |
75 |
73 |
77 |
9357 |
R4 |
| D185-10W |
250/185 |
867/152 |
126 |
75 |
73 |
77 |
9357 |
R4 |
| D185-08W |
250/185 |
1054/116 |
126 |
75 |
73 |
78 |
9357 |
R4 |
| D200-10W |
300/220 |
1044/152 |
126 |
75 |
73 |
78 |
10454 |
R4 |
| D200-08W |
300/220 |
1253/116 |
126 |
75 |
73 |
79 |
10454 |
R4 |
| D250-10W |
350/260 |
1243/152 |
126 |
75 |
73 |
79 |
10787 |
R4 |
| D250-08W |
350/260 |
1486/116 |
126 |
75 |
73 |
80 |
10787 |
R4 |
| D275-09W |
400/300 |
1482/135 |
126 |
75 |
73 |
80 |
11486 |
R4 |
|
|